Common
questions
Will my TV actually sit on this?
Almost certainly. It takes VESA patterns from 200x100 up to 600x400mm, which covers most TVs between 42 and 75 inches.
Look at the four bolt holes on the back of your screen, measure the gap, and compare.
Can I raise or lower the screen later?
The stand height is fixed. The screen sits where its VESA holes meet the rails. A TV with holes near the centre of the back will sit differently from one with holes higher up.
You cannot raise or lower the stand itself. If you need a screen that moves, that is STUDIO, not EASEL.
How much assembling is there?
A little, and not much.
One 4mm hex key, included in the box, handles every joint. No glue, no separate hardware run, no forty step diagram.
Will a heavy TV sit on this without flexing?
The stand is rated for TVs up to 32kg (71 lbs), which covers nearly every television in the 42 to 75 inch range we support.
Solid hardwood legs on a steel base do not flex, and nothing here is hollow.
What if something in it actually fails?
A lifetime structural warranty, for the original buyer, on manufacturing and material defects that affect stability and construction. Lifetime, not five years with an asterisk.
Finish wear, scratches, and misuse are not covered. Wood marks and steel gets scuffed, and that is the furniture ageing rather than failing. Full terms are on the Warranty page.
Can I stand it in my own room before I buy?
Yes. Every product page carries a 3D model you can open in AR on a phone or tablet.
Stand it against your own wall, next to your own TV, and see how it sits before you order anything.